Anritsu MS2090A Handheld Spectrum Analyzer

class pymeasure.instruments.anritsu.AnritsuMS2090A(adapter, name='Anritsu MS2090A Handheld Spectrum Analyzer', **kwargs)

Bases: SCPIUnknownMixin, Instrument

Anritsu MS2090A Handheld Spectrum Analyzer.

abort()

Initiate a sweep/measurement.

property active_state

The “set” state indicates that the instrument is used by someone.

property external_current

This command queries the actual bias current in A

property fetch_control

Returns the Control Channel measurement in json format.

property fetch_density

Returns the most recent channel density measurement

property fetch_eirpower

Returns the current EIRP, Max EIRP, Horizontal EIRP, Vertical and Sum EIRP results in dBm.

property fetch_eirpower_data

This command returns the current EIRP measurement result in dBm.

property fetch_eirpower_max

This command returns the Max EIRP measurement result in dBm.

property fetch_emf

Return the current EMF measurement data. JSON format.

property fetch_emf_meter

Return the live EMF measurement data. JSON format.

property fetch_emf_meter_sample

Return the EMF measurement data for a specified sample number. JSON format.

property fetch_interference_power

Fetch Interference Finder Integrated Power.

property fetch_mimo_antenas

Returns the sync power measurement in json format.

property fetch_ocupied_bw

Returns the different set of measurement information depending on the suffix.

property fetch_ota_mapping

Returns the most recent Coverage Mapping measurement result.

property fetch_pan

Return the current Pulse Analyzer measurement data. JSON format

property fetch_pbch_constellation

Get the latest Physical Broadcast Channel constellation hitmap

property fetch_pci

Returns PCI measurements

property fetch_pdsch

Returns the Data Channel Measurements in JSON format.

property fetch_pdsch_constellation

Get the latest Physical Downlink Shared Channel constellation

property fetch_peak

Returns a pair of peak amplitude in current sweep.

property fetch_power

Returns the most recent channel power measurement.

property fetch_rrm

Returns the Radio Resource Management in JSON format.

property fetch_scan

Returns the cell scanner measurements in JSON format

property fetch_semask

This command returns the current Spectral Emission Mask measurement result.

property fetch_ssb

Returns the SSB measurement

property fetch_sync_evm

Returns the Sync EVM measurement in JSON format.

property fetch_sync_power

Returns the sync power measurements in JSON format

property fetch_tae

Returns the Time Alignment Error in JSON format.

property frequency_center

Sets the center frequency in Hz

property frequency_offset

Sets the frequency offset in Hz

property frequency_span

Sets the frequency span in Hz

property frequency_span_full

Sets the frequency span to full span

property frequency_span_last

Sets the frequency span to the previous span value.

property frequency_start

Sets the start frequency in Hz

property frequency_step

Set or query the step size to gradually increase or decrease frequency values in Hz

property frequency_stop

Sets the start frequency in Hz

property gps

Returns the timestamp, latitude, and longitude of the device.

property gps_all

Returns the fix timestamp, latitude, longitude, altitude and information on the sat used.

property gps_full

Returns the timestamp, latitude, longitude, altitude, and satellite count of the device.

property gps_last

Returns the timestamp, latitude, longitude, and altitude of the last fixed GPS result.

init_all_sweep()

Initiate all sweep/measurement.

property init_continuous

Specified whether the sweep/measurement is triggered continuously

property init_spa_self

Perform a self-test and return the results.

init_sweep()

Initiate a sweep/measurement.

property meas_acpower

Sets the active measurement to adjacent channel power ratio, sets the default measurement parameters, triggers a new measurement and returns the main channel power, lower adjacent, upper adjacent, lower alternate and upper alternate channel power results.

property meas_emf_meter_clear_all

Clear the EMF measurement data of all samples. Sampling state will be turned off if it was on.

property meas_emf_meter_clear_sample

Clear the EMF measurement data for a specified sample number. Sampling state will be turned off if the specified sample is currently active.

property meas_emf_meter_sample

Start or Stop applying the measurement results to the currently selected sample

property meas_int_power

Sets the active measurement to interference finder, sets the default measurement parameters, triggers a new measurement and returns integrated power as the result. It is a combination of the commands :CONFigure:INTerference; :READ:INTerference:POWer?

property meas_iq_capture

This set command is used to start the IQ capture measurement.

property meas_iq_capture_fail

Sets or queries whether the instrument will automatically save an IQ capture when losing sync

property meas_ota_mapp

Sets the active measurement to OTA Coverage Mapping, sets the default measurement parameters, triggers a new measurement, and returns the measured values.

property meas_ota_run

Turn on/off OTA Coverage Mapping Data Collection. The instrument must be in Coverage Mapping measurement for the command to be effective

property meas_power

Sets the active measurement to channel power, sets the default measurement parameters, triggers a new measurement and returns channel power as the result. It is a combination of the commands :CONFigure:CHPower; :READ:CHPower:CHPower?

property meas_power_all

Sets the active measurement to channel power, sets the default measurement parameters, triggers a new measurement and returns the channel power and channel power density results. It is a combination of the commands :CONFigure:CHPower; :READ:CHPower?

property power_density

Sets the active measurement to channel power, sets the default measurement parameters, triggers a new measurement and returns channel power density as the result. It is a combination of the commands :CONFigure:CHPower; :READ:CHPower:DENSity?

property preamp

Sets the state of the preamp. Note that this may cause a change in the reference level and/or attenuation.

property sense_mode

Set the operational mode of the Spa app.

property view_sense_modes

Returns a list of available modes for the Spa application. The response is a comma-separated list of mode names. See command [:SENSe]:MODE for the mode name specification.